Descargo de responsabilidad publicitaria
10 Mejores switches relays en Canada
Mejor opción01DAIERTEKDaierTek 12V Relay with Built-in Diode & 12 AWG Harness Socket 30A/40A Heavy Duty SPDT 5 Pin Relay Switch Waterproof for Automotive Car Marine Boat -8pcs
Características más importantes- 【Wide Application】 - The waterproof relay 12v acts as a bridge between switches and devices, which helps to achieve controlling high rating devices by small rating switches, suitable for auto, car, truck, marine boat, etc.
- 【Waterproof】 - This 5 pin relay 12v has seal ring inside the harness socket to improve its waterproof performance, makes it much safer under moist environment use.
- 【Built-in Diode】 - This 12 volt relay has a built-in diode, which aims to consume the induced voltage that is generated by the coil while switching the status of relay, and therefore protect the electric components from being damaged by the induced voltage.
- 【30A/40A Relay】 - These 5 pin relays are rated at 12v 30A/40A (NO: 40A, NC: 30A), spdt heavy duty design relay switch.
- 【12AWG Harness】 - The wires which come with this relay socket are 12AWG/16AWG design, the 12 awg wires include red, blue and yellow wires which are the wires for high power terminals of the spdt relay; and 16 awg white and black wires for the coil terminals.
9.7Bueno
Mostrar más
- ¿Cómo seleccionamos los mejores productos?
- 02GLARKS
Glarks 10 Pack 12V 30/40 Amp 5-Pin SPDT Electrical Relays Switch for Automotive Truck Boat Marine
Características más importantes- ★ These Relays are Interchangeable/Compatible with: All automobiles and devices equipped with a 12 Volt DC power source.
- ★ Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87).
- ★ Package: Including 10 pack 5-Pin SPDT(Single Pole Double Throw) Electrical Relays Switch packed in a plastic box.
- ★ Application: These relays have a universal application and can be used in automotive setups, car sound systems, security systems, and various other applications.
- ★ 40A/30A High Switching Capability.
9.6Bueno
Mostrar más
Mejor valor03WeaschWeasch 9038 Relay Bypass Switch, Relay Tester, Fuel Pump Relay Bypass Switch Kit, Pack of 6 (1)
12% de descuentoCaracterísticas más importantes- This Relay Bypasses Switches is great for electrical diagnostics, Simply plug it into the location of the fuel pump relay and it will directly control the fuel pump circuit. Saves a ton of time
- Package: 1 x Relay Bypasses Switches (6 Pack). Please check the OEM part number and make sure your part number matches this before purchasing
- PA66 high-quality flame-retardant shell, dustproof and waterproof; silver contacts have high conductivity, ensuring continuous and stable operation of the power supply
- Operating Range Up to 20 Amps continuous, 30 Amps surge (12V)
- 9038 replaces part numbers 9036, 9037. Applicable to most Domestic, Japanese, Korean and German fuel pumps, window motors, headlight switches and other devices using automotive relays
9.5Bueno
Mostrar más
- 04Valefod
[2-Pack] DC 12V Relay Module 2-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger
Características más importantes- 【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- 【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- 【High Compatibility】The relay module can be controlled directly by 12V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Pi, MSP430, TTL logic etc).
- 【Fault-tolerant Design】The relay will not operate even if the control line is disconnected.
- 【Control Devices】The 2-channel relay module uses genuine high quality DC12V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
9.3Bueno
Mostrar más
- 05Arwrilt
Car Four Pin Relay Switch, 30A 12V Multi-purpose Automotive Relay, Standard Heavy Duty Start Relay, Fuel Pump Relay Fan Relay Replacement, Universal for Most Car Models (Black# 4 PCS)
10% de descuentoCaracterísticas más importantes- Widely Application: This Relays extensive use in various automotive components, including horn relays, headlight relays, cooling fan relays, water pump relays, fuel pump relays, solenoid valve relays for sliding door handles, luggage compartment solenoid valve relays, and more.
- Flame Resistant Housing: Due to made of flame-resistant materials, this car starter relay exhibits excellent flame retardancy. In the event of a fire emergency or hazardous condition, it effectively minimizes fire propagation, enhancing vehicle and passenger safety.
- Convenient Use: Our motor relayis suitable for normal antomobile to use, simple operation, you only need to connect the relay and wire, no need other tools, very convenient and easy to use and replace, allow components work normally.
- 30A Current: With a current rating of 30 amps, this relay is capable of managing a maximum current load of 30A. This makes it an ideal choice for high-power applications, including car starter motors.
- 12V DC: Aligning with the voltage standard prevalent in most automobiles, this relay boasts broad applicability. It is specifically tailored for automotive systems operating on a DC 12V power supply.
9.2Bueno
Mostrar más
- 06Valefod
Valefod DC 12V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10
Características más importantes- 【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- 【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA.
- 【High Compatibility】The relay module can be controlled directly by 12V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc).
- 【Fault-tolerant Design】The relay will not operate even if the control line is disconnected.
- 【Control Devices】The 1-channel relay module uses genuine high quality DC12V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current.
9.1Bueno
Mostrar más
- 07JUFZQO
Replace 9038A Relay Tester, Relay Bypass Switch Kit with Amp Loop, 6 Packs
Características más importantes- Wide Compatibility: Compatible with most domestic, Japanese, Korean and German automotive equipment, including fuel pumps, cooling fans, window motors, headlight switches, air conditioning compressors, etc., as well as other equipment using automotive relays, replace 9038A
- Stable Performance: The housing is made of high-quality materials, dustproof and waterproof, and can operate stably under various harsh conditions. The silver contacts are highly conductive, ensuring continuous and stable operation of the power supply and improving test accuracy
- High Current Capacity: The kit supports up to 20 amps of continuous current and 30 amps of surge current (12V), ensuring reliable relay testing and control
- Efficient and Convenient: The relay tester has an independent switch function, which can be used for accurate diagnosis without starting the vehicle, and quickly detect specific circuit faults without waiting or encountering any vehicle start restrictions
- Current Monitoring Function: Equipped with an amplification loop function, it can be used with a clip-on amplifier probe/laboratory oscilloscope to monitor current and clearly identify abnormal conditions, thereby simplifying the diagnosis process
8.8Bueno
Mostrar más
- 08ELEFOCUS
Automotive Relay Harness Set - ELEFOCUS 5 Pin 12V 30/40 AMP SPDT with Interlocking Relay Socket and Color-Labeled Harnesses, 6 Pack
Características más importantes- WIDE APPLICATION: The relay can be used in many places such as car keys power control, over-load protection, trunk release, polarity change, change a low current output to high current, control motors and any other electroni
- Package includes: 5 relays + 5 socket wires: 86(yellow), 85(white), 87(red), 87A(blue), 30(black)
- INTERLOCKING RELAY SOCKET: The relay socket harness base is interlocking designed for easy cable management and organization.
- Easy Wiring - The relay sockets come with color-labeled wires for loads/accessories convenient wiring. Metal mounting tab on the relay for easy installation
- 5 Pin Relay - 12 Volt DC (Max 14 V), Bosch Style 5-Pin SPDT (Single Pole Double Throw) Automotive Relay. NOTE: 12V and 14V is the coil voltage, they are not the battery/power voltage for open the relay.
8.7Bueno
Mostrar más
- 09Tnisesm
Tnisesm 2PCS Sealed Power Relay SPST AC120V Coil, 40 Amp 120 VAC with Flange Mounting and 8 Quick Connect Terminals Wires High Power Relay HF105F-4-AC120V-8X
Características más importantes- SPST(1NO) Coil Voltage : AC 120V; 30A SPST 240VAC
- Product Type: Miniature Power Relay with Terminal Wires
- Package Content : 2 x Power Relay, 8 Terminal Wires
- Epoxy sealed versions available
- Easy to use: Attached with crimping terminals wires for worry-free installation.
8.6Bueno
Mostrar más
- 10Weasch
Weasch 2 Pack Fuse Relay Switch Kit, 12V 30A, 5 Pin SPDT, 30A Switch Harness Set, Automotive Electrical Relays with 14 AWG Hot Wires
Características más importantes- Rated voltage 12VDC (14V Max), 30A High Switching Capability
- Package: 2 x Relays, 2 x Harness, 2 x 30A Blade fuses
- Built in fuse receptacle includes 30A blade fuse and heavy duty 14AWG wire for main contacts
- Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87), Green- Output Closed Contact (87a)
- 5-Pins SPDT (Single Pole Double Throw) Relay
8.5Bueno
Mostrar más
